| Colors |
| Weather Guard |
 | |  | |  | |  | |  | |  | |  |
Gutter Colors
| Standing Seam Metal Roof Colors |
Product Description:
Architectural sheet metal consisting of a hot-dipped
galvanized steel which is primed & coated with a premium,
full-strength Kynar 500 or Hylar 5000 resin-based coating
system.
Basic Uses:
For the typical use of sheet metal in building applications.
Coated architectural sheet metal may be used for standing
seam roof panels vertical wall panels, soffit, fascia, rain
gutters, downspouts and other associated flashings, trims,
and accessories.
Technical Data:
Substrate: 24 gauge AISI-G90, minimum spangle, skin
passed, tension leveled, CS grade type A
Meets ASTM A653/A653M requirements.
Coating:
BASF Flouroceram premium coating system used on
Weather Guard architectural sheet metal on one side
consists of a primer followed by a top coat of a full-strength
70% Polyvinylidene Fluoride (PVDF) coating. A primer and
white backer are applied to the reverse side for additional
protection. This coating meets requirements for American
Architectural Manufacturers Association (AAMA) 605.2 and
610.1. See chart below for performance details. (Information
in the table below obtain from Elf Atochem North America,
Inc. and BASF Corporation Industrial Coatings)
Architectural sheet metal consisting of a hot-dipped
galvanized steel which is primed & coated with a premium,
full-strength Kynar 500 or Hylar 5000 resin-based coating
system.
Basic Uses:
For the typical use of sheet metal in building applications.
Coated architectural sheet metal may be used for standing
seam roof panels vertical wall panels, soffit, fascia, rain
gutters, downspouts and other associated flashings, trims,
and accessories.
Technical Data:
Substrate: 24 gauge AISI-G90, minimum spangle, skin
passed, tension leveled, CS grade type A
Meets ASTM A653/A653M requirements.
Coating:
BASF Flouroceram premium coating system used on
Weather Guard architectural sheet metal on one side
consists of a primer followed by a top coat of a full-strength
70% Polyvinylidene Fluoride (PVDF) coating. A primer and
white backer are applied to the reverse side for additional
protection. This coating meets requirements for American
Architectural Manufacturers Association (AAMA) 605.2 and
610.1. See chart below for performance details. (Information
in the table below obtain from Elf Atochem North America,
Inc. and BASF Corporation Industrial Coatings)
| Property Specification Performance |
| Dry Film Hardness ASTM D3363 Meets or exceeds specification |
Dry Film Adhesion ASTM D3359 No Adhesion Loss
| Impact Resistance ASTM D2794 No cracking or adhesion loss |
Humidity Resistance ASTM D2247 or D4585 Meets or exceeds specification
| Salt Spray Resistance ASTM B117 Meets or exceeds specification |
Color Retention ASTM D2244 Meets or exceeds specification
| Chalk Resistance ASTM D4214, method D659 Meets or exceeds specification |
Dry Film Thickness 0.9+/-0.1 mil
| Formability Can be formed without film fracture using normal practices to a 1T to 2T bend radius |
| | | | | | | | | | | | |